RESEARCH INTO THE ELECTRICAL PROPERTIES OF THE SBS PLASTIC AFTER 3D-PRINTING
https://doi.org/10.31143/2221-7789-2024-2-56-65
EDN: HJSRMQ
Abstract
This article investigates the electrical properties of styrene-butadiene-styrene (SBS) plastic, samples from which are obtained using the FFF/FDM extrusion additive technology. Several 3D-printing modes are considered, based on a different combination of basic and variable 3D-printer settings. For all printed samples of SBS plastic, the value of the dielectric constant was determined, and a comparative analysis was performed. The results of this analysis made it possible to identify 3D-printing modes that provide the value of the dielectric constant closest to the values obtained for samples of SBS plastic made by traditional methods. At the end
About the Authors
A. S. Vivtonenko
Moscow Polytechnic University
Russian Federation
Russian Federation
D. A. Taksimbayeva
Moscow Polytechnic University
Russian Federation
Russian Federation
P. A. Petrov
Moscow Polytechnic University
Russian Federation
Russian Federation
N. S. Shmakova
Technology center for collective use “Technopark Slava”; MIREA – Russian Technological University
Russian Federation
Russian Federation
I. A. Chmutin
Technology center for collective use “Technopark Slava”; MIREA – Russian Technological University
Russian Federation
Russian Federation
References
1. Criteria for selecting a material for casting plastic products [electronic edition] ‒ URL: https://chenhsong.ru/2023/01/criteria-for-selecting-a-material-for-casting-p/ (date of access: 11.04.2023).
2. Petrov P.A., Bronin M.A., Saprykin B.Yu., Dolgov M.A. 3D Printing with Low-Temperature Plastic // Additive Technologies. 2022. No. 1. Pp. 26–29.
3. Blok L.G., Longana M.L., Yu H., Woods B.K.S. An investigation into 3D-printing of fiber reinforced thermoplastic composites // Additive Manufacturing. 2018. V. 22. Р. 176–186.
4. ITC 32-2017. Information and technical reference book on the best available technologies. Production of polymers, including biodegradable ones. Moscow, NDT Bureau, 2017.
5. Renukappa N.M., Siddaramaiah B., Sudhakar Samuel R.D. Styrene butadiene rubber/aluminum pow- der composites-mechanical, morphological and electrical behaviors // J. Mater. Sci.: Mater. Electron. 2007.
6. V. 18, N 6. P. 635–645.
7. Ellingford C., Zhang R., Wemyss A.M., Bowen C., McNally T., Figiel Ł., Wan C. Intrinsic Tuning of Poly(styrene-butadiene-styrene)-Based Self-Healing Dielectric Elastomer Actuators with Enhanced Electrome- chanical Properties // ACS Applied Materials & Interfaces. 2018. V. 10, N 44. Р. 38438–38448.
8. Abu-Abdeen M., Nasr G.M., Osman H.M., Aboud A.I. The Electrical Properties of SBR-NBR inter- linked composites loaded with metal salts // Egyptian Journal of Solids. 2002. V. 25, N 2. Р. 275–294.
9. Anilkumar T., Ramesan M.T. Fire Resistance and Temperature dependent Electrical properties of Chemically modified Styrene Butadiene Rubber // Journal of Chemical and Pharmaceutical Sciences. 2016. Special Issue 1, N 1. Р. 91–96.
10. Ellingford C., Wan C., Figiel Ł., McNally T. Mechanical and dielectric properties of MWCNT filled chemically modified SBS/PVDF blends // Composites Communications, 2018. V. 8. Р. 58–64.
Review
For citations:
Vivtonenko A.S., Taksimbayeva D.A., Petrov P.A., Shmakova N.S., Chmutin I.A. RESEARCH INTO THE ELECTRICAL PROPERTIES OF THE SBS PLASTIC AFTER 3D-PRINTING. Proceedings of the Kabardino-Balkarian State University. 2024;14(2):56-65. (In Russ.) https://doi.org/10.31143/2221-7789-2024-2-56-65. EDN: HJSRMQ
Views:
21
JATS XML
Email this article 