THE MODELLING OF CARRING OUT OF APPLIED STRESS FROM POLYMER MATRIX TO NANOFILLER IN NANOCOMPOSITES POLYMER/CARBON NANOTUBE
https://doi.org/10.31143/2221-7789-2024-4-28-33
EDN: DKXDYC
Kozlov G.V., Yanovsky Yu.G., Karnet Yu.N. Structure and properties of dispersion-filled polymer composites: fractal analysis. M.: Allastransatom, 2008. 363 pp.
Atlukhanova L.B., Dolbin I.V. Functionalization of the nanofiller in polymer nanocomposites - the influence of the degree of aggregation//Izvestia Kabardino-Balkarian State University. 2022. T. 12, NO. 1. S. 5-11.
Atlukhanova L.B., Dolbin I.V. Influence of interface surfaces on the structure of carbon nanotubes in polymer nanocomposites//Izvestia Kabardino-Balkarian State Universiade - theta. 2022. T. 12, NO. 2. S. 5-9.
Dolbin I.V., Kudrova E.G., Davydova V.V., Kozlov G.V. Effective modulus of elasticity of organoline tactoids in polymer nanocomposites//Izvestia Kabardino-Balkarian State University. 2022. T. 12, NO. 5. S. 10-13.
Magomedov G.M., Dolbin I.V. Comparative scaling analysis of polyurethane amplification by graphene and carbon nanotubes//Izvestia Kabardino-Balkarian State University. 2022. T. 12, NO. 6. S. 10-12.
Magomedov G.M., Dolbin I.V. Mechanisms of transfer of applied mechanical stress in nanocomposites polymer/organoglina//Izvestia Kabardino-Balkarian State University. 2023. T. 13, NO. 2. S. 33-39.
Tochiev JS, Sapaev KH, Dolbin I.V. Effective modulus of elasticity of filler for composites based on polyamide-6//Izvestia Kabardino-Balkarian State University. 2023. T. 13, NO. 3. S. 100-104.
Knunyants N.N., Lyapunova M.A., Manevich L.I., Oshmyan V.G., Shaulov A.Yu. Modeling the effect of imperfect adhesion on the elastic properties of a dispersed-filled composite//Mechanics of composite materials. 1986. VOL. 22, NO. 2. S. 231-234.
ДолбинИ.В.,КудроваЕ.Г.,ДоронкинаИ.Г.,СолодовникС.Г.
Pukanszky B. Influence of interface interaction on the ultimate tensile properties of polymer compos- ites // Composites. 1990. V. 21, N 2. P. 255–262.
Sheng N., Boyce M.C., Parks D.M., Rutledge G.C., Abes J.I., Cohen R.E. Multiscale micromechanical modelling of polymer/clay nanocomposites and the effective clay particle // Polymer. 2004. V. 45, N 2. P. 487–506.
Микитаев А.К., Козлов Г.В., Заиков Г.Е. Полимерные нанокомпозиты: многообразие струк- турных форм и приложений. М.: Наука, 2009. 278 с.
Schaefer D.W., Justice R.S. How nano are nanocomposites? // Macromolecules. 2007. V. 40, N 24.
P. 8501–8517.
Bridge B. Theoretical modeling of the critical volume fraction for percolation conductivity in fibre- loaded conductive polymer composites // J. Mater. Sci. Lett. 1989. V. 8, N 2. P. 102–103.
Yanovsky Yu.G., Kozlov G.V., Zhirikova Z.M., Aloev V.Z., Karnet Yu.N. Special features of the structure of carbon nanotubes in polymer composite media // Intern. J. of Nanomechanics Science and Tech- nology. 2012. V. 3, N 2. P. 99–124.
Бобрышев А.Н., Козомазов В.Н., Бабин Л.О., Соломатов В.И. Синергетика композитных ма- териалов. Липецк: НПО ОРИУС, 1994. 154 с.
Abstract
It has been shown that at certain critical nanofiller contents in nanocomposites polymer/carbon nanotube discrete reduction of carring out of applied to specimen mechanical stress from polymer matrix to nanofiller happens. Such effect is due to reaching of critical transitions in nanocomposites structure: percolation threshold or formation of closed annular structures of carbon nanotubes. Reaching of the indicated critical nanofiller contents defines reduction (or rate increasing) of nanocomposites mechanical properties.
About the Authors
I. V. Dolbin
Kabardino-Balkarian State University
Russian Federation
E. G. Kudrova
Russian State University of Tourism and Service
Russian Federation
I. G. Doronkina
Russian State University of Tourism and Service
Russian Federation
S. G. Solodovnik
Russian State University of Tourism and Service
Russian Federation
References
1. Козлов Г.В., Яновский Ю.Г., Карнет Ю.Н. Структура и свойства дисперсно-наполненных по- лимерных композитов: фрактальный анализ. М.: Альянстрансатом, 2008. 363 с.
2. Атлуханова Л.Б., Долбин И.В. Функционализация нанонаполнителя в полимерных нанокомпо- зитах – влияние степени агрегации // Известия Кабардино-Балкарского государственного университета. 2022. Т. 12, № 1. С. 5–11.
3. Атлуханова Л.Б., Долбин И.В. Влияние поверхностей раздела на структуру углеродных нанот- рубок в полимерных нанокомпозитах // Известия Кабардино-Балкарского государственного универси- тета. 2022. Т. 12, № 2. С. 5–9.
4. Долбин И.В., Кудрова Е.Г., Давыдова В.В., Козлов Г.В. Эффективный модуль упругости так- тоидов органолины в полимерных нанокомпозитах // Известия Кабардино-Балкарского государственно- го университета. 2022. Т. 12, № 5. С. 10–13.
5. Магомедов Г.М., Долбин И.В. Сравнительный скейлинговый анализ усиления полиуретана графеном и углеродными нанотрубками // Известия Кабардино-Балкарского государственного универ- ситета. 2022. Т. 12, № 6. С. 10–12.
6. Магомедов Г.М., Долбин И.В. Механизмы переноса приложенного механического напряжения в нанокомпозитах полимер/органоглина // Известия Кабардино-Балкарского государственного универ- ситета. 2023. Т. 13, № 2. С. 33–39.
7. Точиев Дж.С., Сапаев Х.Х., Долбин И.В. Эффективный модуль упругости наполнителя для композитов на основе полиамида-6 // Известия Кабардино-Балкарского государственного университета. 2023. Т. 13, № 3. С. 100–104.
8. Кнунянц Н.Н., Ляпунова М.А., Маневич Л.И., Ошмян В.Г., Шаулов А.Ю. Моделирование влияния неидеальной адгезионной связи на упругие свойства дисперсно-наполненного композита // Механика композитных материалов. 1986. Т. 22, № 2. С. 231–234.
For citations:
Dolbin I.V.,
Kudrova E.G.,
Doronkina I.G.,
Solodovnik S.G.
THE MODELLING OF CARRING OUT OF APPLIED STRESS FROM POLYMER MATRIX TO NANOFILLER IN NANOCOMPOSITES POLYMER/CARBON NANOTUBE. Proceedings of the Kabardino-Balkarian State University. 2024;14(4):28-33.
(In Russ.)
https://doi.org/10.31143/2221-7789-2024-4-28-33. EDN: DKXDYC
Views:
46
JATS XML