PHYSICO-CHEMICAL PROPERTIES OF POLYMER MATERIALS BASED ON FUEL WASTE, DEPENDING ON THE TYPE OF PORE-FORMING ADDITIVE
https://doi.org/10.31143/2221-7789-2023-4-124-126
EDN: BBIAXW
Abstract
The purpose of this work is to study the effect of pore-forming additives on the technological properties of functional geopolymer materials for construction purposes.
About the Authors
S. Chaudhary
M.I. Platov South Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
E. A. Yatsenko
M.I. Platov South Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
B. M. Goltsman
M.I. Platov South Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
V. D. Tkachenko
M.I. Platov South Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
References
1. Панишев Н.В., Бигеев В.А., Галиулина Е.С. Перспективы утилизации хвостов углеобогащения и твердых отходов тепловых электростанций // Теория и технология металлургического производства. 2015. № 2 (17). С. 69–77.
2. Ryabov Y.V. et al. Methods for beneficiation of ash and slag waste from coal-fired thermal power plants and ways for their commercial use (a review) // Thermal Engineering. 2019. V. 66. P. 149–168.
3. Škvára F. et al. Microstructure of geopolymer materials based on fly ash // Ceramics-Silikaty. 2006.
4. V. 50, N 4. P. 208–215.
Review
For citations:
Chaudhary S., Yatsenko E.A., Goltsman B.M., Tkachenko V.D. PHYSICO-CHEMICAL PROPERTIES OF POLYMER MATERIALS BASED ON FUEL WASTE, DEPENDING ON THE TYPE OF PORE-FORMING ADDITIVE. Proceedings of the Kabardino-Balkarian State University. 2023;13(4):124-126. (In Russ.) https://doi.org/10.31143/2221-7789-2023-4-124-126. EDN: BBIAXW
Views:
37
JATS XML
Email this article 