THE MECHANISMS OF TRANSFER OF APPLIED MECHANICAL STRESS FOR NANOCOMPOSITES POLYMER/ORGANOCLAY
https://doi.org/10.31143/2221-7789-2023-2-33-39
EDN: UUZSNQ
Abstract
The conditions of transfer of applied to sample of nanocomposite polymer/organoclay mechanical stress from polymeric matrix to nanofiller were studied. It has been shown that efficiency of transfer is defined by degree of nanofiller aggregation, which can be estimated as number of organoclay separate plate- lets per one aggregate (tactoid). The last parameter depends on existence of binding agent. The effective (re- al) elasticity modulus of nanofiller is function of efficiency of applied stress transfer and is independent on nanofiller elasticity modulus actually.
About the Authors
Gus. M. Magomedov
Dagestan State Pedagogical University
Russian Federation
Russian Federation
I. V. Dolbin
Kabardino-Balkarian State University
Russian Federation
Russian Federation
References
1. Coleman J.N., Cadek M., Ryan K.P., Fonseca A., Nady J.B., Blau W.J., Ferreira M.S. Reinforcement of polymers with carbon nanotubes. The role of an ordered polymer interfacial region. Experiment and modeling // Polymer. 2006. V. 47, N 23. P. 8556–8561.
2. Комаров Б.А., Джавадян Э.А., Иржак В.И., Рябенко А.Г., Лесничая В.А., Зверева Г.И., Крестинин А.В. Эпоксиаминные композиты со сверхмалыми концентрациями однослойных углеродных нанотрубок // Высокомолек. соед. А. 2011. Т. 53, № 6. С. 897–905.
3. Елецкий А.В. Механические свойства углеродных нанотрубок // Успехи физических наук. 2007. Т. 177, № 3. С. 223–274.
4. Witten T.A., Rubinstein M., Colby R.H. Reinforcement of rubber by fractal aggregates // J. Phys. II France. 1993. V. 3, N 3. P. 367–383.
5. Ranade A., Nayak K., Fairbrother D., D’Souza N.A. Maleated and non-maleated polyethylenemontmorillonite layered silicate blown films: creep, dispersion and crystallinity // Polymer. 2005. V. 46, N 21. P. 7323–7333.
6. Pukanszky B. Influence of interface interaction on the ultimate tensile properties of polymer composites // Composites. 1990. V. 21, N 2. P. 255–262.
7. Микитаев А.К., Козлов Г.В., Заиков Г.Е. Полимерные нанокомпозиты: многообразие структурных форм и приложений. М.: Наука, 2009. 278 с.
8. Sheng N., Boyce M.C., Parks D.M., Rutledge G.C., Abes J.I., Cohen R.E. Multiscale micromechan- ical modeling of polymer/clay nanocomposites and the effective clay particle // Polymer. 2004. V. 45, N 2. P. 487–506.
9. Kozlov G.V., Mikitaev A.K. Structure and Properties of Nanocomposites Polymer/Organoclay. Saarbrücken: LAP LAMBERT Academic Publishing GmbH and Comp., 2013. 318 p.
10. Szazdi L., Pukanszky B., Vancso G.J. Quantitative estimation of the reinforcing effect of layered silicates in PP nanocomposites // Polymer. 2006. V. 47, N 15. P. 4638–4648.
11. Szazdi L., Pozsgay A., Pukanszky B. Factors and processes influencing the reinforcing effect of layered silicates in polymer nanocomposites // European Polymer J. 2007. V. 43, N 2. P. 345–359.
12. Renner K., Henning S., Moczo J., Yang M.S., Choi H.J., Pukanszky B. Micromechanical defor- mation processes in PA/layered silicate nanocomposites: correlation of structure and properties // Polymer Engng. Sci. 2007. V. 47, N 7. P. 1235–1245.
Review
For citations:
Magomedov G.M., Dolbin I.V. THE MECHANISMS OF TRANSFER OF APPLIED MECHANICAL STRESS FOR NANOCOMPOSITES POLYMER/ORGANOCLAY. Proceedings of the Kabardino-Balkarian State University. 2023;13(2):33-39. (In Russ.) https://doi.org/10.31143/2221-7789-2023-2-33-39. EDN: UUZSNQ
Views:
41
JATS XML
Email this article 