Influence of milling modes on the fatigue strength of modified carbon fiber reinforced plastics under critical operating conditions
https://doi.org/10.31143/2221-7789-2026-1-57-61
EDN: QNUSMU
Abstract
The results of studies assessing the influence of milling modes of carbon fiber reinforced plastics, including those with matrices modified with triethylene glycol dimethacrylate and siloxane vinyl-containing rubber with a platinum catalyst, on changes in their static and cyclic strength under flexural loading after exposure to conditions of low negative temperatures (–50 °С), high humidity and salt fog are presented.
About the Authors
Igor S. Bolotnikov
Moscow automobile and road construction state technical university (MADI)
Russian Federation
Russian Federation
Ekaterina A. Kosenko
Moscow automobile and road construction state technical university (MADI)
Russian Federation
Russian Federation
Natalya I. Baurova
Moscow automobile and road construction state technical university (MADI)
Russian Federation
Russian Federation
References
1. Buznik V.M., Kablov E.N. The State and Prospects of Arctic Materials Science // Bulletin of the Russian Academy of Sciences. 2017. No. 9. Pp. 827–839.
2. Evdokimov A.A., Petrova A.P., Pavlovsky K.A., et al. Influence of climatic aging on the properties of PCM based on epoxy-vinyl ester binder // Proceedings of VIAM. 2021. No. 3 (97). Pp. 128–136.
3. Fedorov S.Yu., Tarabrina T.D., Nelub V.A. Modern Technologies for Imparting Functional Properties to Carbon Fibers // Chemical Industry Today. 2023. No. 5. Pp. 4–10.
4. Bolotnikov I.S., Kosenko E.A., Demin P.E. Influence of machining modes and negative temperature on the static bending strength of carbon fiber reinforced plastics // Polymer Science – Series D. 2023. V. 16, N 4. P. 1028–1033.
5. Bolotnikov I.S., Kosenko E.A. Influence of Milling Conditions and Negative Temperature on the Strength of Carbon Fiber Reinforced Polymer during Cyclic Bending Loading // Russian Metallurgy (Metally). 2024. V. 2024, N 7. P. 1648–1653.
6. Mityasov, L.V. Features of Carbon Fiber Processing // Chief Mechanic. 2018. No. 6. Pp. 25–28.
7. Karatas M.A., Gokkaya H. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials // Defence Technology. 2018. V. 14, N 4. P. 318–326.
8. Raskutin A.E., Khrulkov A.V., Girsh R.I. Technological Features of Machining Composite Materials in the Production of Structural Parts (Review) // Proceedings of VIAM. 2016.
9. No. 6 (45). Pp. 106–118.
10. Rogov V.A., Tyukpiekov V.N. Features of Processing Non-Metals // Bulletin of the Russian University of Peoples' Friendship. Series: Engineering Research. 2000. No. 3. Pp. 44–49.
11. Bolotnikov I.S. Development of a Testing Machine for Determining Fatigue Characteristics of Polymer Composite Materials under Cyclic Bending Loading // Steel in Translation. 2024. V. 54, N 11. P. 1068–1072.
Review
For citations:
Bolotnikov I.S., Kosenko E.A., Baurova N.I. Influence of milling modes on the fatigue strength of modified carbon fiber reinforced plastics under critical operating conditions. Proceedings of the Kabardino-Balkarian State University. 2026;16(1):57-61. (In Russ.) https://doi.org/10.31143/2221-7789-2026-1-57-61. EDN: QNUSMU
Views:
35
JATS XML
Email this article 