DIRECTIONAL FORMATION OF COMBINED POLYMER LAYER DURING ASSEMBLY OF MACHINE PARTS SHAFT-BUSHING JOINTS
Abstract
The article presents the results of the properties analysis of modern polymer adhesive materials for their compliance with the operating conditions of shaft-bushing joints, which are used in automotive and agricultural machinery, gearboxes. A shaft-bushing joints assembly original method with directional formation of polymer layer combined structure is presented. The strength of the polymer shaft-bushing joints assembled according to the developed method exceeded the strength of conventional polymer shaft-bushing joints by 1.2–2.5 times.
About the Authors
A. V. Ignatov
N.E. Bauman Moscow State Technical University
Russian Federation
Russian Federation
S. A. Mozgin
N.E. Bauman Moscow State Technical University
Russian Federation
Russian Federation
References
1. Ignatov A.V., Mozgin S.A., Belikov M.A., Korenkov N.Y. Improving the quality of adhesive joints in helicop-ter assemblies using directional formation of the adhesive layer combined structure // AIP Conference Proceedings. 2019. Р. 2318.
2. Evstifeeva E.A. Technological Support of the Strength Characteristics of Pre-Tensioned Joints during Assembly with Anaerobic Materials: Diss. ... Cand. Tech. Sci. Penza, 2009. 169 p.
3. Malysheva G.V., Vereshchagin V.A. Adhesives for Conveyor Assembly of Motor Vehicles // Automobile Industry. 2001. No. 8. Pp. 29–31.
4. Adhesive bonding in mechanical engineering. Handbook in 2 vol. Vol. 1 / D.A. Aronovich, V.P. Varlamov, V.A. Voitovich, et al.; under the general editorship of G.V. Malysheva. Moscow: Science and Technology, 2005. 544 p.
5. Kholodkova A.G., Basinyuk V.P., Mardosevich E.I. Adhesive joints in gear transmissions // Assembly in Mechanical Engineering and Instrument Making. 2006. No. 4. Pp. 11–17.
6. Ignatov A.V., Ostrovsky Yu.A., Mozgin S.A. Automation of the Choice of Anaerobic Composition in the Assembly of Products in Diesel Engine Engineering // Assembly in Mechanical Engineering and Instrument Engineering. 2018. No. 10. Pp. 442–450.
7. Ignatov A.V., Tagiltsev S.V., Namazova A.I. Reducing Vibration of Boring Bar // AIP Conference Proceedings. 2019. Р. 2171.
8. Ignatov A.V., Mozgin S.A. Assembly of Adhesive Cylindrical Joints in Flow Production Conditions // High Technologies in Mechanical Engineering: Proceedings of the XVIII All-Russian Scientific and Technical Conference. Samara: SamSTU, 2021, pp. 63–67
Review
For citations:
Ignatov A.V., Mozgin S.A. DIRECTIONAL FORMATION OF COMBINED POLYMER LAYER DURING ASSEMBLY OF MACHINE PARTS SHAFT-BUSHING JOINTS. Proceedings of the Kabardino-Balkarian State University. 2022;12(6):23-30.
Views:
5
JATS XML
Email this article 