DEVELOPMENT OF TECHNOLOGICAL REGULATIONS FOR OBTAINING PRODUCTS FROM FLUOROPLASTS BY VOLUME PLASTIC DEFORMATION AND EVALUATION OF THEIR TECHNICAL CHARACTERISTICS
https://doi.org/10.31143/2221-7789-2024-1-90-95
EDN: OXHUXZ
Abstract
In this paper, the technological modes of manufacturing radio engineering insulators from fluoroplastics are investigated, the quality and roughness of the surface of the product, its heat resistance, depending on the degree of workpiece reduction, are assessed. Technological regulations for obtaining products have been developed.
About the Authors
A. A. Chuprikova
Tambov State Technical University
Russian Federation
Russian Federation
D. O. Zavrazhin
Tambov State Technical University
Russian Federation
Russian Federation
G. S. Baronin
Tambov State Technical University
Russian Federation
Russian Federation
References
1. Baronin G.S., Kerber M.L., Minkin E.V., Radko Yu.M. Processing of Polymers in the Solid Phase. Physical and Chemical Fundamentals: Monograph. Moscow: Mashinostroenie-1, 2002. 320 p.
2. Baronin G.S., Radko Yu.M. Three-Dimensional Stamping of Thermoplastic Parts for Mechanical Engineering // Processes and Apparatus for the Production of Polymer Materials, Methods and Equipment for Processing Them into Products: Abstracts of the Scientific and Technical Conference. Moscow, 1986. Vol. 2. Pp. 39–40.
3. Patent of the Russian Federation No. 2446188 C2. Method of preparing blanks from polymer composite materials for solid-state pressure processing / Baronin G.S., Dmitriev V.M., Zavrazhin D.O., Kobzev D.E., Kombarova P.V., Tkachev A.G. Published on March 27, 2012. Application No. 2010108492/05 dated March 9, 2010.
4. Goryainova A.V., Bozhkov G.K., Tikhonova M.S. Fluoroplastics in Mechanical Engineering. Moscow: Mashinostroenie, 1972. 185 p.
5. Chegodaev D.D., Naumova Z.K., Dunaevskaya Ts.S. Fluoroplasts. L.: Goskhimizdat, 1960. 192 p.
6. Pugachev D.V. Influence of structural and rheological factors on the kinetics of solid-phase processing of heat-resistant polymer materials: Diss... cand. tech. sciences. Tambov, 2010. 155 p.
7. Stelmakh L.S., Stolin A.M. Mathematical Modeling of SHS-Extrusion. Part 2. Rheodynamic Models // Engineering Physics Journal. 1993. Vol. 64, No. 3. Pp. 90–94.
8. Stelmakh L.S., Stolin A.M., Khusid B.M. Rheodynamics of Extruding Viscous Compressible Materials // Engineering Physics Journal. 1991. V. 61, No. 2. Pp. 268–276.
9. Stelmakh L.S., Stolin A.M., Baronin G.S. Mathematical Modeling of Solid-Phase Extrusion of Composite Materials // Perspective Materials. Special Issue 2008. Part 2,
10. No. 6. Pp. 279–284.
11. Baronin G.S., Radko Yu.M., Vorobyev Yu.V. Volumetric stamping of products from fluoroplastics for mechanical engineering // Modern methods of synthesis of automatic machines and their systems: thesis. dokl. The All-Union. the meeting. Tambov, 1981. P. 173.
12. Baronin G.S., Artemova T.G., Radko Yu.M., Vorobyev Yu.V. Processing of fluoroplastics in a solid state of aggregation // Tambov. in-t chemical. mechanical engineering. Tambov, 1982. 1 p. Dept. in ONITEKHIM (Cherkassy) No. 47hp-D82.
13. Beloshenko V.A., Varyukhin V.N., Spuskanyuk V.Z. Theory and practice of hydraulic extrusion. Kiev: Naukova dumka, 2007. 248 p.
Review
For citations:
Chuprikova A.A., Zavrazhin D.O., Baronin G.S. DEVELOPMENT OF TECHNOLOGICAL REGULATIONS FOR OBTAINING PRODUCTS FROM FLUOROPLASTS BY VOLUME PLASTIC DEFORMATION AND EVALUATION OF THEIR TECHNICAL CHARACTERISTICS. Proceedings of the Kabardino-Balkarian State University. 2024;14(1):90-95. (In Russ.) https://doi.org/10.31143/2221-7789-2024-1-90-95. EDN: OXHUXZ
Views:
48
JATS XML
Email this article 