INVESTIGATION OF THE ELECTROPHYSICAL AND MECHANICAL PROPERTIES OF A COMPOSITE MATERIAL BASED ON A PTFE MATRIX WITH AN ADDITION OF TITANIUM DIOXIDE OF VARIOUS CRYSTAL STRUCTURE
https://doi.org/10.31143/2221-7789-2024-2-22-26
EDN: FZUFBB
Abstract
The technology of printed circuit boards is the most common in modern electronic instrumentation. Manufacturing of microwave frequency range boards is based on foil composite materials, in particular, polytetrafluoroethylene. At the moment, there is no local production of such materials. Information about foreign manufacturing technology of this material and the influence of the filler on the characteristics of the composite material is closed. Therefore, an actual task is to search and study properties of composite materials for microwave applications with properties similar to foreign analogues.
About the Authors
A. M. Sosunov
Saint Petersburg Electrotechnical University «LETI»
Russian Federation
Russian Federation
A. E. Komlev
Saint Petersburg Electrotechnical University «LETI»
Russian Federation
Russian Federation
A. G. Altynnikov
Saint Petersburg Electrotechnical University «LETI»
Russian Federation
Russian Federation
R. A. Platonov
Saint Petersburg Electrotechnical University «LETI»
Russian Federation
Russian Federation
D. A. Kudryavtseva
Saint Petersburg Electrotechnical University «LETI»
Russian Federation
Russian Federation
References
1. Zou K. et al. Recent advances in lead-free dielectric materials for energy storage // Materials Research Bulletin. 2019. V. 113. P. 190–201.
2. Shi R. et al. Flexible and transparent capacitive pressure sensor with patterned microstructured com- posite rubber dielectric for wearable touch keyboard application // Science China Materials. 2018. V. 61, N 12.
3. P. 1587-1595.
4. Xie J. et al. Research progress of high dielectric constant zirconia-based materials for gate dielectric application // Coatings. 2020. V. 10, N 7. P. 698.
5. Belous A. et al. Microwave composite dielectrics based on magnesium titanates // Journal of the European Ceramic Society. 2007. V. 27, N 8-9. P. 2963–2966.
6. Castles F. et al. Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
7. // Scientific reports. 2016. V. 6, N 1. P. 1–8.
8. Peng R. et al. High-performance microwave dielectric composite ceramics sintered at low tempera- ture without sintering-aids // Journal of Alloys and Compounds. 2020. V. 831. P. 154878.
9. Nikitin A.A. et al. Electromagnonic crystals based on ferrite–ferroelectric–ferrite multilayers // IET Microwaves, Antennas & Propagation. 2020. V. 14, N 12. P. 1304–1309.
10. Paillard M. et al. Multilayer RF PCB for space applications: technological and interconnections trade- off // 2005 European Microwave Conference. IEEE. 2005. V. 3. P.1642.
11. Ye Y., Guo T. L. Hole metallisation technology for microwave printed circuit board // Transactions of the IMF. 2009. V. 87, N 4. P. 217–220.
12. Fuscaldo W. et al. Broadband Dielectric Characterization of High-Permittivity Rogers Substrates via Terahertz Time-Domain Spectroscopy in Reflection Mode // Applied Sciences. 2022. V. 12, N 16. P. 8259.
13. Luukkonen O., Maslovski S.I., Tretyakov S.A. A stepwise Nicolson–Ross–Weir-based material pa- rameter extraction method // IEEE antennas and wireless propagation letters. 2011. V. 10. P. 1295–1298.
14. Rothwell E.J. et al. Analysis of the Nicolson-Ross-Weir method for characterizing the electromag- netic properties of engineered materials // Progress In Electromagnetics Research. 2016. V. 157. P. 31–47.
15. Arslanagić S. et al. A Review of the Scattering-Parameter Extraction Method with Clarification of Ambiguity Issues in Relation to Metamaterial Homogenization. IEEE Antennas Propag. Mag. 2013. V. 55.
16. P. 91–106.
Review
For citations:
Sosunov A.M., Komlev A.E., Altynnikov A.G., Platonov R.A., Kudryavtseva D.A. INVESTIGATION OF THE ELECTROPHYSICAL AND MECHANICAL PROPERTIES OF A COMPOSITE MATERIAL BASED ON A PTFE MATRIX WITH AN ADDITION OF TITANIUM DIOXIDE OF VARIOUS CRYSTAL STRUCTURE. Proceedings of the Kabardino-Balkarian State University. 2024;14(2):22-26. (In Russ.) https://doi.org/10.31143/2221-7789-2024-2-22-26. EDN: FZUFBB
Views:
17
JATS XML
Email this article 