SYNTHESIS AND STUDY OF THE PROPERTIES OF NANOCOMPOSITE POLYURETHANE COATINGS MODIFIED WITH FUNCTIONALIZED MULTIWALLED CARBON NANOTUBES
Abstract
A series of polyurethane coatings was obtained using functionalized multilayer carbon nanotubes (fMWCNTs) with various chemical surface modifications. The effect of additives on the physical-mechanical and operational characteristics of the synthesized materials was studied. Based on the results obtained, the introduction of fMWCNTs into the composition for obtaining polyurethane coatings contributes to a significant improvement in the physical-mechanical and operational characteristics of the resulting materials.
About the Authors
Ruslan Romanovich Vlasov
Lobachevsky State University of Nizhny Novgorod
Russian Federation
Russian Federation
Sergey Alexandrovich Ryabov
Lobachevsky State University of Nizhny Novgorod
Russian Federation
Russian Federation
Maria Vladimirovna Buzaeva
Ulyanovsk State Technical University
Russian Federation
Russian Federation
References
1. Engels H.W., Pirkl H.-G., Albers R., Albach R.W., Krause J., Hoffmann A., Casselmann H., Dormish J. Polyurethanes: Versatile Materials and Sustainable Problem Solvers for Today’s Challenges // Angew. Chem. Int. Ed. 2013. V. 52, N 36. P. 9422–9441.
2. Cheng Z., Li Q., Yan Z., Liao G., Zhang B., Yu Y., Yi C., Xu Z. Design and synthesis of novel aminosiloxane crosslinked linseed oil-based waterborne polyurethane composites and its physicochemical properties // Prog. Org. Coat. 2019. V. 127. P. 194–201.
3. Zhang Y., Maxted J., Barber A., Lowe C., Smith R. The durability of clear polyurethane coil coatings studied by FTIR peak fitting // Polym. Degrad. Stab. 2013. V. 98, N 2. P. 527–534.
4. Wang X., Hu J., Li Y., Zhang J., Ding Y. The surface properties and corrosion resistance of fluorinated polyurethane coatings // J. Fluorine Chem. 2015. V. 176. P. 14–19.
5. Ma C., Zhang W., Zhang G., Qian P.-Y. Environmentally friendly antifouling coatings based on biodegradable polymer and natural antifoulant // ACS Sustainable Chem. Eng. 2017. V. 5, N 7. P. 6304–6309.
6. Wang C., Ma C., Mu C., Lin W. Tailor-made zwitterionic polyurethane coatings: microstructure, mechanical property and their antimicrobial performance // RSC Adv. 2017. V. 7. P. 27522–27529.
7. Wang C., Yi Z., Sheng Y., Tian L., Qin L., Ngai T., Lin W. Development of a novel biodegradable and anti-bacterial polyurethane coating for biomedical magnesium rods // Mater. Sci. Eng., C. 2019. V. 99. P. 344–356.
8. Lukawski D., Lekawa-Raus A., Lisiecki F., Koziol K., Dudkowiak A. Towards the development of superhydrophobic carbon nanomaterial coatings on wood // Prog. Org. Coat. 2018. V. 125. P. 23–31.
9. Lee C.J., Park J., Kang S.Y., Lee J.H. Growth and field electron emission of vertically aligned multiwalled carbon nanotubes // Chem. Phys. Lett. 2000. V. 326, N 1. P. 175–180.
10. Calvert P. Nanotube composites: a recipe for strength // Nature. 1999. V. 399. P. 210–211.
11. Song H., Qi H., Li N., Zhang X. Tribological behaviour of carbon nanotubes/polyurethane nanocomposite coatings // Micro Nano Lett. 2011. V. 6, N 1. P. 48–51.
12. Shen W., Feng L., Liu X., Luo H., Liu Z., Tong P., Zhang W. Multiwall carbon nanotubes-reinforced epoxy hybrid coatings with high electrical conductivity and corrosion resistance prepared via electrostatic spraying // Prog. Org. Coat. 2016. V. 90. P. 139–146.
13. Li G., Feng L., Tong P., Zhai Z. The properties of MWCNT/polyurethane conductive composite coating prepared by electrostatic spraying // Prog. Org. Coat. 2016. V. 90. P. 284–290.
14. Ge J.J., Hou H., Li Q., Graham M.J., Dreiner A., Reneker D.H., Harris F.W., Cheng S.Z.D. Assembly of well-aligned multi walled carbon nanotubes in confined polyacrylonitrile environments: electrospun composite nanofiber sheets // J. Am. Chem. Soc. 2004. V. 126, N 48. P. 15754–15761.
15. Chen W.X., Li F., Han G., Xia J.B., Wang L.Y., Tu J.P., Xu Z.D. Tribological behavior of carbon-nanotube-filled PTFE composite // Tribol. Lett. 2003. V. 15. P. 27–-278.
16. Song D., Yin Z., Liu F., Wan H., Gao J., Zhang D., Li X. Effect of carbon nanotubes on the corrosion resistance of water-borne acrylic coatings // Prog. Org. Coat. 2017. V. 110. P. 182–186.
17. Gu B.-E., Huang C.-Y., Shen T.-H., Lee Y.-L. Effects of multiwall carbon nanotube addition on the corrosion resistance and underwater acoustic absorption properties of polyurethane coatings // Prog. Org. Coat. 2018. V. 121. P. 226–235.
18. Li J., Wong P.-S., Kim J.-K. Hybrid nanocomposites containing carbon nanotubes and graphite nanoplatelets // Mater. Sci. Eng., A. 2008. V. 483, N 1. P. 660–663.
19. Gojny F.H., Wichmann, M.H.G., Fiedler B., Schulte K. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – a comparative study // Compos. Sci. Technol. 2005. V. 65, N 15–16. P. 2300–2313.
20. Gojny F.H., Nastalczyk J., Roslaniec Z., Schilte K. Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites // Chem. Phys. Lett. 2003. V. 370, N 5–6. P. 820–824.
Review
For citations:
Vlasov R.R., Ryabov S.A., Buzaeva M.V. SYNTHESIS AND STUDY OF THE PROPERTIES OF NANOCOMPOSITE POLYURETHANE COATINGS MODIFIED WITH FUNCTIONALIZED MULTIWALLED CARBON NANOTUBES. Proceedings of the Kabardino-Balkarian State University. 2022;12(5):44-48. (In Russ.)
Views:
5
JATS XML
Email this article 