THE INVESTIGATION OF HEAT FLOW IN THE DELTA BOT FDM 3D-PRINTER WITH ISOLATED HEAT CHAMBER
Abstract
Heat flows in a closed chamber of a 3D-printer with delta bot kinematics are investigated. A computer simulation of the distribution of temperatures and air flows in the Autodesk CFD software package was carried out. A uniform heating zone is determined in the 3D-printer chamber with a temperature, that is equal to the low limit of the temperature of the ABS plastic injection mold. The necessity of preheating the printer camera to avoid the effect of delamination of layers is shown. The analysis of the possibility of heating the 3d printer to the upper limit of the mold temperature (70 °C) was carried out.
About the Author
Alexander Anatolyevich Solovyov
MIREA – Russian Technological University
Russian Federation
Russian Federation
References
1. Business Profile Group Analytical Research. 3D Printing Technology Market in Russia and the World, 2020. 15 p.
2. Lepoivre A., Boyard N., Levy A., Sobotka V. Heat transfer and adhesion Study for the FFF Additive Manufacturing Process // 23rd International Conference on Material Forming (ESAFORM 2020). Cottbus: Procedia Manufacturing. 2020. V. 47. P. 948–955.
3. Skrzypczak N.G., Tanikella N.G., Pearce, J.M. Open source high-temperature RepRap for 3D-printing heat-sterilizable PPE and other applications // HardwareX. 2020. V. 8. P. 1–40.
4. Maidin S., Wong J.H.U., Mohamed A.S., Romlee W.F.A., Akmal S. Vacuum System Assisted FDM – Charasteristic of Heat Transfer using Finite Element Analysis // International Journal of Recent Technoloy and Engineering. 2019. V. 8, N 5. P. 1–6.
5. Jerez-Mesa R., Travieso-Rodriguez J.A., Corbella X., Busque R., Gomez-Gras G. Finite element analysis of the thermal behaviour of a RepRap 3D-printer liquefier // Mechatronics. 2016. V. 001. P. 1–8.
6. Bellini A., Gu¨c¸eri S., Bertoldi M. Liquefier Dynamics in Fused Deposition // J. Manuf. Sci. Eng. 2004. V. 126, N 2. P. 237–246.
7. Pandey A., Pradhan S.K. Investigations into Complete Liquifier Dynamics and Optimization of Process Parameters for Fused Deposition Modelling // Materials Today: proceeding. 2018. V. 5. P. 12940–12955.
8. Maqsood N., Rimasauskas M. Delamination observation occurred during the flexural bending in additively manufactured PLA-short fiber filemant reinforced with continuous carbon fiber composite // Results in Engineering. 2021. V. 11. P. 1–6.
9. NEMA17-AMT112S Series Datasheet – Stepper Servo Motors.
10. Gates PowerGrip® GT®2 Drive Design Manual. Denver, 2000. 179 p.
Review
For citations:
Solovyov A.A. THE INVESTIGATION OF HEAT FLOW IN THE DELTA BOT FDM 3D-PRINTER WITH ISOLATED HEAT CHAMBER. Proceedings of the Kabardino-Balkarian State University. 2022;12(5):70-74. (In Russ.)
Views:
5
JATS XML
Email this article 